Invasive Plant Control Database

Welcome to the Invasive Plant Control Database

This website contains information on how to control many invasive plants common to the Midwestern United States. Information was collected from both scientific literature and expert opinions and summarized by the Midwest Invasive Plant Network (MIPN), in partnership with the Mark Renz lab from the University of Wisconsin-Madison. Methods that are uncommon, do not provide sufficient control, or lack information for determining effectiveness on target species are omitted. For each species, information was reviewed by four individuals, including two identified as experts on control of that species. Information is searchable by several fields to improve the user’s ability to find pertinent information. To view the search feature, you must first select an invasive plant. Additionally, users have the option of entering personal experiences with managing specific species (see “add new case studies” under search results). These case studies will be visible to all users once verified by MIPN staff.

We make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability, or availability with respect to the information or products on the website. Any reliance you place on such information is therefore strictly at your own risk. References to pesticide products on this website are for your convenience and are not an endorsement or guarantee of one product over another.

Step 1: Select Plant

Step 1: Select a species by choosing a common or scientific name from the list, or by typing a name in the search box.

    Reset Search

Step 2: Select Search Parameters

Step 2: Select search parameter(s) of interest. If no parameters are selected all control methods will be displayed. For effectiveness ratings, methods that meet or exceed the criteria selected will be displayed.

Under the Search Results you will find

  • Plant Identification information – information on species identification, including photographs and a current distribution map.
  • Ecological Threats – threats posed to natural ecosystems by this species.
  • Case Studies – Detailed success (and failures) on how to control specific species contributed by experienced personnel.
  • Non-chemical and chemical control methods that fit the selected search criteria. Please note you are responsible for using pesticides in accordance with the label directions and state and federal laws. Herbicide availability and registered uses vary from state to state. Contact your state department of agriculture for information on the correct use and licensing required for any pesticide application.

You may reset the search criteria or the species you have selected at any time by selecting the corresponding links on the right hand side of the page.

Are you a novice?: 
Habitat Type:
Seasons:
Effectiveness (in season): 


Effectiveness (year after treatment): 
  Reset Search Criteria

Search Results
Plant Identification information >
Display Ecological Threats >
< Hide Case Studies              Add new user Case Study

Case Studies
No case studies are entered for selected plant.
Non-Chemical controls
New (Type)Description
Type -
Mowing

User Type -
Novice

Effectiveness -
in season
year after treatment
Mowing removes above ground growth of established plants and prevents additional seed production, but rarely kills plants as established plants persist even after mowing for many years. Due to prolific resprouting, pairing mowing with another technique (such as foliar spray of herbicide) increases effectiveness. If seeds are present when mowing, avoid movement off-site unless material can be transported without spreading fruit to other locations.
Type -
Prescribed burning

User Type -
Professional

Effectiveness -
in season
year after treatment
Spring burns can kill germinating seedlings and suppress above ground growth of established plants, depending on fire intensity. After the fire, established plants will quickly resprout; this management method is not recommended unless integrated with other techniques. A hand-held propane torch can be effective for treating seedlings.
Type -
Removal

User Type -
Novice

Effectiveness -
in season
year after treatment
Small plants (<0.4" in diameter) are easily pulled from moist soil. Larger plants can be dug or pulled, but are rarely removed successfully. Any roots left in the soil will resprout and reinvade the area. If seeds are present during removal, avoid movement off-site unless material can be transported without spreading fruit to other locations. At least four years of treatment are typically required to eradicate a population.
Type -
Girdling

User Type -
Novice

Effectiveness -
in season
year after treatment
Using a hand-axe, make a cut through the bark encircling the base of the tree 6" above the ground. Be sure that the cut disrupts the cambium layer. This method will top kill the tree, but resprouting will occur and require follow-up treatments for several years. Use this method on large trees where the use of herbicides is not practical.
Chemical controls
New (Type)IngredientsDirections
Type -
Foliar

User Type -
Professional

Effectiveness -
in season
year after treatment
Active Ingredient (A.I.):
aminopyralid

Common product name:
Milestone VM
Rate -
(broadcast) 7 fl oz/A (0.1 lb a.e./A)
(spot) Equivalent to broadcast rates.

Timing -
Apply to 3-4' tall resprouts after cutting.

Remarks -
14 fl oz/A can be used as long as less than half of the area is treated. Depending on the volume of solution applied per acre, typical mixtures for spot treatments are 3¿7 mL Milestone per gallon of water.

Caution -
Do not apply directly to water or to areas where surface water is present. Remains in soil for up to one year depending on application rate. Overspray or drift to desirable plants should be avoided, as even minute quantities of the spray may cause severe injury to plants. Do not compost treated plants as herbicide can persist through composting process.
Type -
Foliar

User Type -
Professional

Effectiveness -
in season
year after treatment
Active Ingredient (A.I.):
dicamba

Common product name:
Banvel
Rate -
(broadcast) 64 fl oz/A (2 lb a.e./A)
(spot) 64 fl oz/A (2 lb a.e./A)

Timing -
Apply when target species is actively growing and fully leafed out.

Caution -
Do not apply directly to water or to areas where surface water is present. Use of this chemical in areas where soils are permeable, particularly where the water table is shallow, may result in groundwater contamination. Overspray or drift to desirable plants should be avoided, as even minute quantities of the spray may cause severe injury to plants. Rates > 16oz/A (0.5 lb a.e./A) may cause stunting and discoloration of sensitive grasses, such as smooth brome.
Type -
Foliar

User Type -
Novice

Effectiveness -
in season
year after treatment
Active Ingredient (A.I.):
glyphosate

Common product name:
Roundup
Rate -
(broadcast) 1.5-3.75 lb a.e./A
(spot) For a 3 lb a.e./gal product. 1-2% (0.03-0.06 lb a.e./gal)

Timing -
Apply when target species is actively growing and fully leafed out.

Caution -
Use product labeled for aquatic use if potential exists for solution to contact surface waters. Applications can result in bare ground as glyphosate is not selective. Overspray or drift to desirable plants should be avoided, as even minute quantities of the spray may cause severe injury to plants.
Type -
Foliar

User Type -
Professional

Effectiveness -
in season
year after treatment
Active Ingredient (A.I.):
imazapyr

Common product name:
Arsenal
Rate -
(broadcast) 64-96 fl oz/A (1-1.5 lb a.e./A)
(spot) 2-4% (0.04-0.08 lb a.e./gal)

Timing -
Apply when target species is actively growing and fully leafed out.

Caution -
Use product labeled for aquatic use if potential exists for solution to contact surface waters. Applications can result in bare ground as imazapyr is not selective and can remain in the soil for several months to over a year depending on application rate. Overspray or drift to desirable plants should be avoided, as even minute quantities of the spray may cause severe injury to plants.
Type -
Foliar

User Type -
Professional

Effectiveness -
in season
year after treatment
Active Ingredient (A.I.):
metsulfuron

Common product name:
Escort
Rate -
(broadcast) 0.5-3 oz/A (0.3-1.8 oz a.i./A)
(spot) 0.04 oz/gal (0.03 oz a.i./gal)

Timing -
Apply when target species is actively growing and fully leafed out.

Caution -
Do not apply directly to water or to areas where surface water is present. Remains in the soil for months depending on application rate. Overspray or drift to desirable plants should be avoided as even minute quantities of the spray may cause severe injury to plants.
Type -
Foliar

User Type -
Novice

Effectiveness -
in season
year after treatment
Active Ingredient (A.I.):
triclopyr

Common product name:
Element 4
Rate -
(broadcast) 128-256 fl oz/A (4-8 lb a.e./A)
(spot) 1-2% (0.04-0.08 lb a.e./gal)

Timing -
Apply when target species is actively growing and fully leafed out.

Caution -
Use product labeled for aquatic use if potential exists for solution to contact surface waters. Use of this chemical in areas where soils are permeable, particularly where the water table is shallow, may result in groundwater contamination. Overspray or drift to desirable plants should be avoided as even minute quantities of the spray may cause severe injury to plants.
Type -
Foliar

User Type -
Novice

Effectiveness -
in season
year after treatment
Active Ingredient (A.I.):
triclopyr + 2,4-D

Common product name:
Crossbow
Rate -
(broadcast) 192 fl oz/ A (triclopyr: 1.5 lb a.e./A + 2,4-D: 3 lb a.e./A)
(spot) 1-1.5% (triclopyr: 0.01-0.02 lb a.e./gal + 2,4-D: 0.02-0.03 lb a.e./gal)

Timing -
Apply when target species is actively growing and fully leafed out.

Caution -
Do not apply directly to water or to areas where surface water is present. Use of this chemical in areas where soils are permeable, particularly where the water table is shallow, may result in groundwater contamination. Overspray or drift to desirable plants should be avoided, as even minute quantities of the spray may cause severe injury to plants.
Type -
Cut stump

User Type -
Professional

Effectiveness -
in season
year after treatment
Active Ingredient (A.I.):
dicamba

Common product name:
Banvel
Rate -
(spot) 33-50% (1.3-2 lb a.e./gal)

Timing -
Apply any time of year.

Caution -
Do not apply directly to water or to areas where surface water is present. Use of this chemical in areas where soils are permeable, particularly where the water table is shallow, may result in groundwater contamination. Overspray or drift to desirable plants should be avoided, as even minute quantities of the spray may cause severe injury to plants. Rates > 16oz/A (0.5 lb a.e./A) may cause stunting and discoloration of sensitive grasses, such as smooth brome.
Type -
Cut stump

User Type -
Novice

Effectiveness -
in season
year after treatment
Active Ingredient (A.I.):
glyphosate

Common product name:
Roundup
Rate -
(spot) For a 3 lb a.e./gal product. 20-50% (0.3-0.6 lb a.e./gal)

Timing -
Apply any time of year.

Caution -
Use product labeled for aquatic use if potential exists for solution to contact surface waters. Applications can result in bare ground as glyphosate is not selective. Overspray or drift to desirable plants should be avoided, as even minute quantities of the spray may cause severe injury to plants.
Type -
Cut stump

User Type -
Professional

Effectiveness -
in season
year after treatment
Active Ingredient (A.I.):
imazapyr

Common product name:
Stslker
Rate -
(spot) 6-12% in oil (0.1-0.25 lb a.e./gal)

Timing -
Apply any time of year.

Caution -
Use product labeled for aquatic use if potential exists for solution to contact surface waters. Applications can result in bare ground as imazapyr is not selective and can remain in the soil for several months to over a year depending on application rate. Overspray or drift to desirable plants should be avoided, as even minute quantities of the spray may cause severe injury to plants.
Type -
Cut stump

User Type -
Novice

Effectiveness -
in season
year after treatment
Active Ingredient (A.I.):
triclopyr

Common product name:
Element 4
Rate -
(spot) 25-50% in oil (1-2 lb a.e./gal)

Timing -
Apply any time of year.

Caution -
Use product labeled for aquatic use if potential exists for solution to contact surface waters. Use of this chemical in areas where soils are permeable, particularly where the water table is shallow, may result in groundwater contamination. Overspray or drift to desirable plants should be avoided as even minute quantities of the spray may cause severe injury to plants.
Type -
Cut stump

User Type -
Novice

Effectiveness -
in season
year after treatment
Active Ingredient (A.I.):
triclopyr + 2,4-D

Common product name:
Crossbow
Rate -
(spot) 4% in oil (triclopyr: 0.04 lb a.e./gal + 2,4-D: 0.08 lb a.e./gal)

Timing -
Apply any time of year.

Caution -
Do not apply directly to water or to areas where surface water is present. Use of this chemical in areas where soils are permeable, particularly where the water table is shallow, may result in groundwater contamination. Overspray or drift to desirable plants should be avoided, as even minute quantities of the spray may cause severe injury to plants.
Type -
Hack-and-squirt

User Type -
Novice

Effectiveness -
in season
year after treatment
Active Ingredient (A.I.):
glyphosate

Common product name:
Roundup
Rate -
(spot) For a 3 lb a.e./gal product. 50-100% (1.5-3 lb a.e./gal)

Timing -
Apply any time of year.

Caution -
Use product labeled for aquatic use if potential exists for solution to contact surface waters. Applications can result in bare ground as glyphosate is not selective. Overspray or drift to desirable plants should be avoided, as even minute quantities of the spray may cause severe injury to plants.
Type -
Hack-and-squirt

User Type -
Professional

Effectiveness -
in season
year after treatment
Active Ingredient (A.I.):
imazapyr

Common product name:
Stalker
Rate -
(spot) 6-9% in oil (0.1-0.2 lb a.e./gal)

Timing -
Apply any time of year.

Caution -
Use product labeled for aquatic use if potential exists for solution to contact surface waters. Applications can result in bare ground as imazapyr is not selective and can remain in the soil for several months to over a year depending on application rate. Overspray or drift to desirable plants should be avoided, as even minute quantities of the spray may cause severe injury to plants.
Type -
Hack-and-squirt

User Type -
Novice

Effectiveness -
in season
year after treatment
Active Ingredient (A.I.):
triclopyr

Common product name:
Element 3A
Rate -
(spot) 50-100% (2-4 lb a.e./gal)

Timing -
Apply any time of year.

Caution -
Use product labeled for aquatic use if potential exists for solution to contact surface waters. Use of this chemical in areas where soils are permeable, particularly where the water table is shallow, may result in groundwater contamination. Overspray or drift to desirable plants should be avoided as even minute quantities of the spray may cause severe injury to plants.
Type -
Basal bark

User Type -
Professional

Effectiveness -
in season
year after treatment
Active Ingredient (A.I.):
dicamba

Common product name:
Banvel
Rate -
(spot) 25-50% (1-2 lb a.e./gal)

Timing -
Apply any time of year.

Caution -
Do not apply directly to water or to areas where surface water is present. Use of this chemical in areas where soils are permeable, particularly where the water table is shallow, may result in groundwater contamination. Overspray or drift to desirable plants should be avoided, as even minute quantities of the spray may cause severe injury to plants. Rates > 16oz/A (0.5 lb a.e./A) may cause stunting and discoloration of sensitive grasses, such as smooth brome.
Type -
Basal bark

User Type -
Professional

Effectiveness -
in season
year after treatment
Active Ingredient (A.I.):
imazapyr

Common product name:
Stalker
Rate -
(spot) 6-9% in oil (0.1-0.2 lb a.e./gal)

Timing -
Apply any time of year.

Caution -
Use product labeled for aquatic use if potential exists for solution to contact surface waters. Applications can result in bare ground as imazapyr is not selective and can remain in the soil for several months to over a year depending on application rate. Overspray or drift to desirable plants should be avoided, as even minute quantities of the spray may cause severe injury to plants.
Type -
Basal bark

User Type -
Novice

Effectiveness -
in season
year after treatment
Active Ingredient (A.I.):
triclopyr

Common product name:
Element 4
Rate -
(spot) 25-30% in oil (1-1.2 lb a.e./gal)

Timing -
Apply any time of year.

Caution -
Use product labeled for aquatic use if potential exists for solution to contact surface waters. Use of this chemical in areas where soils are permeable, particularly where the water table is shallow, may result in groundwater contamination. Overspray or drift to desirable plants should be avoided as even minute quantities of the spray may cause severe injury to plants.
Did you find this page helpful?
Further feedback: